Victaulic Catalog

AWWA Ductile Iron Pipe
Grooved System

AWWA Fittings

Pipe
Inches/mm		No. 20-C
Tee		No. 35-C
Cross		No. 30-C
45° Lateral		No. 60-C
Cap §
Nominal
Size		Actual
Size		C to E
Inches
mm		Approx.
Wgt. Ea.
Lbs.
kg		C to E
Inches
mm		Approx.
Wgt. Ea.
Lbs.
kg		C to LE
Inches
mm		C to SE
Inches
mm		Approx.
Wgt. Ea.
Lbs.
kg		C to E
Inches
mm		Approx.
Wgt. Ea.
Lbs.
kg
3
80		3.96
100.6		5.50
140		14.2
6.4		5.50
140		24.0
10.9		10.00
254		3.00
76		28.0
12.7		--
4
100		4.80
121.9		6.50
165		19.0
8.6		6.50
165		40.0
18.1		12.00
305		3.00
76		38.4
12.7		1.16
29		5.0
2.3
6
150		6.90
175.3		8.00
203		34.0
15.4		8.00
203		71.0
32.2		14.50
368		3.50
89		67.0
30.4		1.16
29		9.0
4.1
8
200		9.05
229.9		9.00
229		59.0
26.8		9.00
229		106.0
48.1		17.50
445		4.50
114		120.0
54.4		1.34
34		16.0
7.3
10
250		11.10
281.9		11.00
279		111.0
50.4		11.00
279		225.0
102.1		20.50
521		5.00
127		215.0
97.5		1.53
39		37.2
16.9
12
300		13.20
335.3		12.00
305		136.0
61.7		12.00
305		310.0
140.6		24.50
622		5.50
140		346.0
157.0		1.53
39		52.0
23.6
14
350		15.30
388.6		14.00
356		262.0
118.8		14.00
356		307.0
139.3		27.00
686		6.00
152		492.0
223.2		*55.0
25.0
16
400		17.40
442.0		15.00
381		304.0
137.9		15.00
381		426.0
193.2		30.00
762		6.50
165		696.0
315.7		*68.0
30.9
18
450		19.50
495.3		16.50
419		408.0
185.1		16.50
419		567.0
254.9		32.00
813		7.00
178		870.0
394.6		*90.0
40.8
20
500		21.60
548.6		18.00
457		552.0
250.4		18.00
457		717.0
325.2		35.00
889		8.00
203		1103.0
500.3		*110.0
50.0
24
600		25.80
655.3		22.00
559		980.0
444.5		22.00
559		1177.0
533.9		40.50
1029		9.00
229		1746.0
792.0		*165.0
74.8
30
750		32.00
812.8		25.00
635		1552.0
704.0		+1366.0
619.6		++3280.0
1487.8		*300.0
136.1
36
900		38.30
972.8		28.00
711		2050.0
929.9		+1885.0
855.0		++5020.0
2277.1		*536.0
243.1

* Dish Caps
+ Contact Victaulic for details.
§ Caps available for 1 - 4" (25 - 100 mm) tap sizes.

Victaulic fittings for AWWA size pipe are supplied with rigid radius grooves in accordance with ANSI/AWWA C-606.Fittings conform to ANSI A21.10/AWWA C-110 for center-to-end dimensions and AWWA C-153 or ANSI A21.10/AWWA C-110 for wall thickness. While most requirements are specified "black" or non-coated, fittings can be supplied with an alkyd-phenolic primer, coal tar coating. An organic zinc primer and other coatings are available.
Fittings are available with flanged ends wherever grooved ends are shown.
Fittings are rated for working pressures to 350 PSI (2400 kPa) (ductile iron) or 250 PSI (1725 kPa) (gray iron) in sizes 3 - 12" (80 300 mm), and to 250 PSI (1725 kPa) (ductile iron), or 150 PSI (1035 kPa) (gray iron)for 14" (350 mm) and larger.
Request 23.05.