Victaulic Catalog

AWWA Ductile Iron Pipe
Grooved System

Style 341
Vic-Flange Adapter


Note: Gray area of mating face must be free from gouges, undulations or deformities of any type for effective sealing.

Nom.
Size
In./mm		Max.
Wk.
Pres.
PSI
kPa		Dimensions
Inches/mm		Aprx.
Wgt.
Ea.
Lbs.
kg
WZ
3
65		250
1725		8.44
214		0.94
24		5.4
2.4
4
100		250
1725		9.94
252		0.94
24		8.2
3.7
6
150		250
1725		12.00
305		1.00
25		12.0
5.4
8
200		250
1725		14.63
372		1.13
29		17.4
7.9
10
250		250
1725		17.19
437		1.19
30		24.6
11.2
12
300		250
1725		20.25
514		1.25
32		34.4
15.6
14
350		200
1375		-
-		1.50
38		55.0
25.0
16
400		150
1035		-
-		1.88
48		80.0
36.3
18
450		150
1035		-
-		2.25
57		95.0
43.1
20
500		150
1035		-
-		2.38
61		115.0
52.2
24
600		150
1035		-
-		2.50
64		150.0
68.0

Refer to notes, click here for details.
Style 341 requires sufficient clearance behind groove to permit proper assembly.

Style 341 Vic-Flange adapters provide direct connection of flanged components into a radius grooved cast pipe system of AWWA dimensions. Style 341 adapters utilize a special gasket (Grade "M" or "S") which seals on the pipe end and mating flange face.
Request 23.04.

Vic-Flange Adapter
Required Sealing Surface

SEALING SURFACE
Inches/millimeters		SEALING SURFACE
Inches/millimeters
Flange
Size		A
Maximum		B
Minimum		Flange
Size		A
Maximum		B
Minimum
3
65		3.96
101		4.94
125		14
350		15.30
389		16.38
416
4
100		4.80
122		5.88
149		16
400		17.40
442		18.38
467
6
150		6.90
175		8.00
203		18
450		19.50
495		20.00
508
8
200		9.05
230		10.13
257		20
500		21.60
549		22.50
572
10
250		11.10
292		12.50
318		24
600		25.80
655		27.75
705
12
300		13.20
335		14.75
375

* This area must be free from gouges, undulations or deformities of any type for effective sealing.
See Flange Adapter Notes, click here for details.