Victaulic Catalog - IPS Stainless Steel Pipe

Victaulic Catalog

IPS Stainless Steel Pipe
Pressfit System

The Pressfit system offers exceptional flow area, smooth fitting radii and reduced pressure drop.
Contact Victaulic for specific flow information and equivalent feet of pipe data for hydraulic calculation.

Thermal Expansion

For thermal expansion/contraction compensation with the Pressfit stainless steel system, request 12.04.

Approved Pipe

Pipe - Inches/mm			Pipe Weight Per Ft. Lbs./kg
Nom. Size	Outside Dia.	Wall Thick	Pipe Weight Per Ft. Lbs./kg
3/4 20	1.050 27	0.065 1.7	0.69 0.4
1 25	1.315 34	0.065 1.7	0.88 0.4
1 1/4 32	1.660 42	0.065 1.7	1.12 0.5
1 1/2 40	1.900 48	0.065 1.7	1.29 0.6
2 50	2.375 60	0.065 1.7	1.62 0.7

* Pipe is supplied in random mill lengths (RML) (17 - 24 ft.) which nominally measure 21 ft. Order quantities will be accepted only in 21 ft. random length increments, subject to industry standard ±10% tolerance. Minimum footage requirements must be specified on the order when required.
Full finished annealed; Scotch Brite O D

For stainless steel pipe approved for use with the Victaulic Pressfit System, contact Victaulic or your nearest Pressfit Stainless Steel distributor.
Approved pipe carries the label, Victaulic Pressfit Pipe. Certified For Use With Pressfit Products.

Dimensional
Information

P (3)
P (1)		P (2)

END TYPE CODE

P = Pressfit
F = Female Pipe Thread
M = Male Pipe Thread
T = Plain End
L = Flanged
G =Grooved

Products in the Pressfit System have unique center-to-end or end-to-end dimensions which incorporate specific, uniform "take out" dimensions for easy fabrication calculations.
Use of threaded products employing special features such as probes, escutcheon cups, etc., should be checked to be certain the thread standard and length of insertion are compatible with fitting dimensions. Failure to verify suitability in advance may result in difficulties in assembly or leakage.