 |
 |
Victaulic Catalog
IPS Stainless Steel Pipe
Pressfit System
Pressfit System for Stainless Steel Pipe
The Victaulic Pressfit for stainless steel pipe provides a fast, easy, clean and reliable means for installing 3/4 - 2"
(20 - 50 mm) stainless steel piping systems. The system requires no flame or arcs as with welding; no cutting oil,
chips or preparation time as with threading or flanging and is rated to 300 PSI (2065 kPa) for ANSI Class 150
systems (except steam). Pressfit pipe is cut to size, inserted into the coupling and the coupling pressed onto the
pipe in seconds. ONLY Certified/Approved Pressfit pipe should be used with Pressfit stainless steel products.
Approved pipe carries the label, Victaulic Pressfit Pipe. Certified for use with Pressing products.
Request 18.01.
Request PB-500 for complete Pressfit system details.
|
|
 | O-Ring - Precisely molded compresses against pipe O.D. Housing - Precision formed Type 316 stainless steel with integral pipe stop Pipe Stop - Assures uniform take-out dimension and positions pipe for proper assembly (not on Slip Coupling) O-Ring Pocket - Sized to contain the O-ring, the pocket is deformed during assembly. Pressfit Tool Indent - Housing is uniformly compressed with the Pressfit Tool into a permanent mechanicalengagement onto the pipe. |