Victaulic Catalog - IPS Carbon Steel Pipe

Nominal Size In. mm	Dimensions Inches/mm				Aprx. Wgt. Ea. Lbs. kg
Nominal Size In. mm	A	B	E	K	Aprx. Wgt. Ea. Lbs. kg
4 100	9.63 245	6.25 159	14.25 362	11.25 286	28.0 12.7
5 125	10.50 267	6.50 165	14.75 375	12.75 324	35.0 15.9
5 1/2 140	10.50 267	6.50 165	14.75 375	12.75 324	35.0 15.9
6 150	11.50 292	7.63 193	15.50 394	13.00 330	46.0 20.9
6 1/2 §§ 165	11.50 292	7.63 193	15.50 394	13.00 330	46.0 20.9
8 200	14.00 356	8.25 210	16.38 416	13.50 343	72.0 32.7

Series 717R FireLock check valves are approved for vertical or horizontal installation and designed to accept a riser check kit. The kit consists of a 2" (50 mm) drain valve, O - 300 PSI (0 - 2065 kPa) gauges (2), gauge isolation valves (2), pipe nipples and pipe plugs. The Series 717R does not include the riser check kit. unless specified.
A welded-in nickel seat provides extra corrosion protection and leak-free sealing under as low as five (5) feet of head. The basic valve is factory tested and is UL/ ULC Listed and FM Approved.
Request 10.09.

Nom. Size Inches mm	Equiv. Feet meters of Pipe	Nom. Size Inches mm	Equiv. Feet meters of Pipe
4 100	19.8 6.0	6 150	27.5 8.4
5 125	22.9 7.0	6 1/2 §§ 165	27.5 8.4
5 1/2 140	25.2 7.7	8 200	31.6 9.6

NOTE: Placement of check valves too close to sources of unstable flow will shorten the life of the valve and potentially may damage the system. To extend valve life valves should be installed a reasonable distance away from pumps, elbows, expanders, reducers or other similar devices. Sound piping practices dictate a minimum of five (5)times the pipe diameter for general use. Distances between three (3) and five (5) diameters are allowable provided the flow velocity is less than eight (8) feet per second (2.4 mps). Distances less than three (3) diameters are not recommended.