Victaulic Catalog

IPS Carbon Steel Pipe
Grooved Valves

CHECK VALVES
Series 716
Vic-Check Valves


Typical 2 1/2 & 3" Sizes
(65 - 80 mm)
Typical 4 - 12" Sizes
(100 - 300 mm)

Nom.
Size
In.
mm		Dimensions - Inches/mmAprx.
Wgt.
Ea.
Lbs.
kg
E - E
A		Over.
Hgt.
B		CE
2 1/2
65		3.88
99		4.25
108		3.56
90		-
-		3.6
1.6
3
80		4.25
108		5.06
129		4.13
105		-
-		4.5
2.0
4
100		9.63
245		6.00
152		3.90
99		3.50
89		20.0
9.1
5
125		10.50
267		6.80
173		4.50
114		4.17
106		27.0
12.3
5 1/2
140		10.50
267		6.80
173		4.50
114		4.17
106		27.0
12.3
6
150		11.50
292		8.00
203		5.00
127		4.50
114		38.0
17.2
6 1/2 §§11.50
292		8.00
203		5.00
127		4.50
114		38.0
17.2
8
200		14.00
356		9.88
251		6.10
155		5.65
144		64.0
29.0
10
250		17.00
432		12.00
305		7.10
180		6.69
170		100.0
45.4
12
300		19.50
495		14.00
356		8.10
206		7.64
194		140.0
63.5

§ Contact Victaulic for availability and details.
§§ O.D. Dimension.

NOTE: Placement of check valves too close to sources of unstable flow will shorten the life of the valve and potentially may damage the system. To extend valve life, valves should be installed a reasonable distance away from pumps, elbows, expanders, reducers or other similar devices. Sound piping practices dictate a minimum of five (5) times the pipe diameter for general use. Distances between three (3) and five (s) diameters are allowable proved the: flow velocity is less than eight (8) feet per second (2.4 mps) Distances less than three (3) diameters are not recommended.

The Series 716 check valve is available in sizes 2 1/2 - 8" (65 - 200 mm). It is a spring assisted single disc design that achieves a leak-free seal with as little as 5 ft. (1.5 m) of head and that can be installed in both horizontal and vertical positions.

Every valve is factory tested to its working pressure of 300 PSI (2065 kPa). Drains are provided both upstream and downstream of the disc.
Request 08.08.