 |  |
Victaulic Catalog
IPS Carbon Steel Pipe
Grooved Valves
Series 700
Butterfly Valves
| |
| Pipe Inches/mm | Dimensions Inches/millimeters | Aprx. Wgt. Ea. kg | |||
| Nom. Size | Act. Size | E - E A | B | F | |
| 1 1/2 40 | 1,900 46.3 | 3.38 86 | 4.45 1.3 | 3.63 92 | 1.6 0.7 |
| 2 50 | 2.375 60.3 | 3.19 81 | 4.97 126 | 4.06 105 | 2.8 1.3 |
| 2 1/2 65 | 2.875 73.0 | 3.81 97 | 6.19 157 | 4.88 124 | 4.8 2.2 |
| 3 §§ | 3.000 76.1 | 3.81 97 | 6.75 171 | 5.63 143 | 5.8 2.6 |
| 3 80 | 3.500 88.9 | 3.81 97 | 6.75 171 | 5.63 143 | 5.8 2.6 |
| 4 100 | 4.500 114.3 | 4.56 116 | 8.19 208 | 7.00 178 | 12.8 5.8 |
| 5 125 | 5.563 141.3 | 5.81 148 | 9.34 237 | 8.50 216 | 24.3 11.0 |
| 6 150 | 6.625 168.3 | 5.81 148 | 10.38 264 | 9.50 241 | 30.8 14.0 |
| 6 1/2 §§ | 6.500 165.1 | 5.81 148 | 10.38 264 | 9.50 241 | 30.8 14.0 |
§§ Outside Diameter.
Victaulic Senes 700 butterfly valves are designed for bubble tight shut-off to 200 PSI (1400 kPa). Two piece stem permits narrow disc design for low pressure drop performance and is self-centenng for positive shut-off. Valves are available with EPDM for water service to +230°F (+110°C) or nitrite for oil services to +150°F (+66°C) liners. Refer to Liner/Disc Selection for general service recommendations.
The body is fully rubber lined, and the valve housing is cast of durable ductile iron. Standard disc is aluminum bronze (also available in 316 stainless steel), with a variety of handles or gear operators available.
Request 08.05 for handle details and performance.
Series 712 & 713
Swinger Check Valve
 Series 712 |  Series 713 |  |
| Pipe Nom. Size In./mm | Dimensions Inches/millimeters | Aprx. Wgt. Each Lbs./kg | Pipe Nom. Size In./mm | Dimensions Inches/millimeters | Aprx. Wgt. Each Lbs./kg | ||||
| End to End A | D | E | End to End A | D | E | ||||
| 2 50 | 9.00 229 | 4.88 124 | 3.38 86 | 11.6 55.3 | 3 80 | 10.75 273 | 5.75 146 | 4.50 114 | 22.5 10.2 |
| 2 1/2 65 | 9.25 235 | 5.50 140 | 3.75 95 | 18.0 8.2 | 4 100 | 12.00 305 | 6.50 165 | 5.88 149 | 38.0 17.2 |
Series 712 Swinger swing check valves have large closure access bonnet for internal coating. A 316 stainless steel clapper features a bonded bumper for coating protection.
Series 712 swing check valves are rated to 300 PSI (2065 kPa) service.
A 2" (50 mm) size stainless steel model is also available, see page 60.
Series 713 is available in 2" (50 mm) size rated to 1000 PSI (6900 kPa).
Request 08.11.