 |
 |
 |
Victaulic Catalog
IPS Carbon Steel Pipe
Grooved Couplings
Style
HP-70ES
Coupling with Fire-R
Gasket
|
|
|
| Nom. Size In. mm |
Max. Work Press. PSI* kPa |
Dimensions Inches/mm |
Aprx. Wgt. Each Lbs. kg |
|
| Y | Z | |||
| 2 50 |
1,000 6900 |
6.13 156 |
1.88 48 |
3.3 1.5 |
| 2 1/2 65 |
1,000 6900 |
6.75 171 |
1.88 48 |
4.0 1.8 |
| 3 80 |
1,000 6900 |
7.38 187 |
1.88 48 |
4.5 2.0 |
| 4 100 |
1,000 6900 |
9.38 238 |
2.13 54 |
7.6 3.4 |
| 6 150 |
1,000 6900 |
12.00 305 |
2.38 60 |
16.7 7.6 |
| 8 200 |
800 5500 |
14.38 365 |
2.75 70 |
26.3 11.9 |
| 10 250 |
800 5500 |
16.75 425 |
3.00 76 |
32.8 14.9 |
| 12 300 |
800 5500 |
18.63 473 |
3.00 76 |
42.1 19.1 |
* Click here for notes.
Note that coupling performance will vary from chart found here.
Contact Victaulic or request 06.14.
The Victaulic HP-70ES EndSeal coupling has an
oil-resistant nitrile gasket with a high modulus for resistance
to extrusion. The Fire-R gasket features a stainless steel inner
leg that provides a secondary closure. Style HP-70ES with Fire-R
gasket meets API 607 standards.
Request 06.14.
| HP-70ES couplings must always be used with pipe or fittings grooved to Victaulic "ES" dimensions. HP-70ES couplings cannot be used with Victaulic Series 700 butterfly valves. |
Extra
Heavy
"ES" EndSeal
Fittings
 |
 |
 |
 |
 |
Victaulic offers fittings with an extra-heavy (schedule 80) wall thickness and "ES" EndSeal grooves especially for use with HP-70ES couplings.
Header Tees are specifically designed for use in oil production headers where the top (test) line is 2" (50mm) size and the bottom production line is 3 or 4" (80 or 100 mm). The special tee center-to-end dimension permits direct alignment with the larger 3 or 4" (80 or 100 mm) C to E.
For fitting sizes and styles not listed,
contact Victaulic for details.
Request 07.03