Victaulic Catalog

IPS Carbon Steel Pipe
Grooved Couplings

Style 741
Vic-Flange Adapter
ANSI Class 125 & 150 Flange
Sizes 2 - 12" (50 - 300 mm)

Note: Gray area of mating face must be free from gouges, undulations or deformities of any type for effective sealing.

Nom.
Size
In.
mm		 Max.
Work
Pres.
PSI*
kPa		 Dimensions
Inches/mm		 Aprx.
Weight
Each
Lbs.
kg
W Z
2
50		 300
2065		 6.75
172		 0.75
19		 3.1
1.4
2 1/2
65		 300
2065		 7.88
200		 0.88
22		 4.7
2.1
3
80		 300
2065		 8.44
214		 0.94
24		 5.4
2.4
4
100		 300
2065		 9.94
252		 0.94
24		 7.7
3.5
5
125		 300
2065		 11.00
279		 0.94
24		 9.3
4.2
6
150		 300
2065		 12.00
305		 1.00
25		 10.3
4.7
6 1/2 §§ 300
2065		 + 1.00
25		 10.0
4.5
8
200		 300
2065		 14.63
372		 1.13
29		 16.6
7.5
10
250		 300
2065		 17.19
437		 1.19
30		 24.2
11.0
12
300		 300
2065		 20.25
514		 1.25
32		 46.8
21.2

*Click here for notes.
§§ See notes below
+ Contact Victaulic for details.

Style 741 Vic-Flange adapter is designing for directly incorporating flanged components with ANSI CL, 125 or CL. 150 bolt hole patterns into a grooved pipe system. Sizes 2 - 12" (50 - 300 mm) are hinged for easy handling with integral end tabs which facilitate assembly.
Request 06.06.

Style 741
Vic-Flange Adapter
ANSI Class 125 & 150 Flange
Sizes 14 - 24" (350 - 600 mm)

Note: Gray area of mating face must be free from gouges, undulations or deformities of any type for effective sealing.

Nom.
Size
In.
mm		 Max.
Work.
Pres.
PSI*
kPa		 Dimensions
Inches/mm		 Aprx.
Wgt.
Each
Lbs.
kg
W Z
14
350		 300
2065		 24.50
622		 1.44
37		 75.0
34.0
16
400		 300
2065		 27.12
689		 1.44
37		 90.0
40.8
18
450		 300
2065		 29.00
737		 1.56
40		 100.0
45.4
20
500		 300
2065		 31.50
800		 1.69
43		 120.0
54.4
24
600		 300
2065		 36.00
914		 1.94
49		 160.0
72.6

* Click here for notes.
See notes below.

Style 741 Vic-Flange adapter is designing for directly incorporating flanged components with ANSI CL, 125 or CL. 150 bolt hole patterns into a grooved pipe system. Sizes 14 - 24" (350 - 600 mm) are cast in four (4) identical segments which are interconnected as assembly is completed.
Request 06.06.

Style 743
Vic-Flange Adapter
Grooved pipe adapter to
ANSI Class 300 flanges

Note: Gray area of mating face must be free from gouges, undulations or deformities of any type for effective sealing.

Nom.
Size
In.
mm		 Max.
Wk.
Pres.
PSI*
kPa		 Dimensions
Inches/mm		 Aprx.
Wgt.
Each
Lbs.
kg
X Z
2
50		 720
4960		 6.50
165		 0.94
24		 4.8
2.2
2 1/2
65		 720
4960		 7.50
191		 1.06
27		 7.4
3.4
3
80		 720
4960		 8.25
210		 1.19
30		 9.1
4.1
4
100		 720
4960		 10.00
254		 1.31
33		 15.3
6.9
5
125		 720
4960		 11.00
279		 1.44
25		 17.7
8.0
6
150		 720
4960		 12.50
318		 1.50
38		 23.4
10.6
8
200		 720
4960		 15.00
381		 1.69
43		 34.3
15.6
10
250		 720
4960		 17.50
445		 1.94
49		 48.3
21.9
12
300		 720
4960		 20.50
521		 2.00
51		 70.5
32.0

* Click here for notes.
See notes below.

Vic-Flange Style 743 flange-to-groove adapter permits direct connection of ANSI Class 300 raised face flanged components. It can be used with flat-face flanges by removing the raised projections on the outside face of the flange.
Request 06.06.

Vic-Flange Adapter
Sealing Surface

Nom.
Size
In.
mm		 Sealing Surface
Inches/mm		 Nom.
Size
In.
mm		 Sealing Surface
Inches/mm		 Nom.
Size
In.
mm		 Sealing Surface
Inches/mm
"A"
Max.		 "B"
Min.		 "A"
Max.		 "B"
Min.		 "A"
Max.		 "B"
Min.
2
50		 2.38
60		 3.41
87		 6
150		 6.63
168		 7.78
198		 14
350		 14.00
356		 16.39
416
2 1/2
65		 2.88
73		 3.91
99		 6 1/2 §§ 6.50
165		 7.66
195		 16
400		 16.00
406		 18.39
467
3
80		 3.50
89		 4.53
115		 8
200		 8.63
219		 9.94
252		 18
450		 18.00
457		 20.00
508
4
100		 4.50
114		 5.53
141		 10
250		 10.75
273		 12.31
313		 20
500		 20.00
508		 22.50
572
5
125		 5.56
141		 6.71
171		 12
300		 12.75
324		 14.31
364		 24
600		 24.00
610		 27.75
705

VIC-FLANGE ADAPTER NOTES

§§ O.D. Dimension
Style 743 Vic-Flange must be ordered as a factory assembly when connected to a Victaulic fitting or valve. ContactVictaulic for details
Bolts required to be supplied by installer, may be ordered from Victaulic. Bolt sizes for conventional flange-to-flange connection. Longer bolts required when Vic-Flange is utilized with wafer-type valves.
Draw bolts supplied with 14 - 24" (350 - 600 mm) Vic-Flange adapters
IMPORTANT NOTES: Style 741 Vic-Flange adapters provide rigid joints when used on pipe with standard cut or roll groove dimensions and consequently allow no linear or angular movement at the joint. When used with Victaulic Series 700 butterfly valves, plastic pipe or light wall metallic pipe, small teeth in I.D. of key section should be removed and may be used on one side of the valve. Contact Victaulic for information on AS2129 - Table E; ISO 2084 (PN10); DIN 2532 (PN10) and JIS B-2210 (10K) flanges.
Because of the outside flange dimension, Vic-Flange should not be used within 90° of one another on a standard fitting. When wafer or lug-type valves are used adjoining a Victaulic fitting, check disc dimensions to assure proper clearance.
Vic-Flange adapters should not be used as anchor points for tie-rods across non-restrained joints. Mating rubber faced flanges, valves, etc., require the use of a Vic-Flange washer. Vic-Flange gaskets must always be assembled with the color coded lip on the pipe and the other lip facing the mating flange.