SuperClamp - Lev Lock - Semi-Automatic Chain Sling Load Positioner

SUPERCLAMP

LEV-LOCK
SEMI-AUTOMATIC CHAIN SLING LOAD POSITIONER

Model No.	S.W.L. 4/1 F.O.S.	S.W.L. 5/1 F.O.S.	A		B		Max. H.T. Hook Size	APPROX. WEIGHT INC. CHAIN
Model No.	TONS	TONS	Ins	mm	Ins	mm	TONS	Lbs	Kg
L2	2	1.6	10	254	6.5	165	3	44.3	20.1
L3	3.2	2.56	11	280	8	203	5	60.06	27.3
L5	5.4	4.32	14.5	370	10	254	10	105.6	48.0
L8	8	6.5	18.5	470	12	305	15	208.4	94.5
L12	12.5	10	23.5	597	15	381	20	340.56	154.8

General Description

The LEV-LOCK does not rely on friction but incorporates a positive automatic mechanical locking/release mechanism. The unit takes only seconds to attach to the crane hook, thus minimizing expensive load and lift procedures.

The center of gravity of an out-of-balance load is determined by the crane operator moving the unit along the chain to the desired point. The initial lift results in the automatic locking of the unit which ensures the load is lifted in a level plane.

Alternatively, the units are capable of lifting loads at a predetermined angle or can be used as an adjustable anchor point when fixed between two overhead beams or structures.

The present range includes: 2T, 3T, 5T, 8T, and 12T SWL units. This product is now in stock and ready to be shipped.

Positions out of balance loads in a horizontal plane at an angle.
Fail safe units up to 12 tons safe working loads.
Tested to twice the safe working load.
Self-lubricating - positive lock.
Simple 'Hang-On' units.
Site erection at an angle.
Can be used with lifting beam.
Eliminates C of G calculations.
Allows fixing hooks to exceed all OSHA Federal and State Regulations.