RATKO PUMPS

LJ PUMPS

     
. LJ-80
HLJ-80		 LJ-500
HLJ-500		 LJ-1003
HLJ-1003		 LJ-2003
HLJ-2003		 LJ-4003
HLJ-4003
Motor 3 Hp/3600 3 Hp/1800 5 Hp/1800 10 Hp/1800 20 Hp/1800
Max. Head 16.0 m 9.0 m 13.0 m 14.5 m 17.5 m
Connection Flange or
hose connection		 Flange Flange Flange Flange
Installation
plate		 500 x 500 mm 500 x 800 mm 500 x 800 mm 500 x 800 mm 700 x 1000 mm
Min. opening
for the pump		 225 x 370 mm 435 x 590 mm 470 x 630 mm 470 x 630 mm 560 x 970 mm
Weight ~45 kg ~100 kg ~145 kg ~145 kg ~265 kg
     
Note: 1 25.4 mm = 1 inch
  2 1 kg = 2.2 lbs.
     

LJ wastewater and slurry pumps
equipped with chopper
 LJ-pumps are equipped with a powerful steel chopper at the suction inlet. This, coupled with a tooth ring, has proven to be the ultimate solution to pumping many thick and difficult wastewaters or slurries. These pumps are non-clogging in the most difficult sumps. All models are available in stainless steel, AISI 316, if required.

Applications Construction
  • Chop and pump waste water at plastic, rubber, textile and leather industries.
  • Agitate settled sumps for cleanout.
  • Chop and pump wastewater in lumber, pulp and paper, chemical, fibreglass and food industries.
  • Chop and pump waste in slaughterhouses.
  • Chop and pump human or animal waste prior to processing.
  • Pump exceptionally thick and difficult wastewater, sludge or slurries in mining industry.
  • The Impeller's hardened cutter blade, coupled with a tooth ring, chops long fibrous material and soft solids as they enter the suction inlet eliminating the possibility of clogging.
  • Components are joined with key bolt or split pin connectors enabling fast parts replacement.
  • Rugged components are used throughout to ensure long, dependable pump life.
  • Special flexible steel shaft.
  • Withstands moderate slurp or dry runs.