Imperial Pipe Corporation - ABS Pipe

IMPERIAL PIPE CORPORATION offers a comprehesive range of ABS pipe from 1" to 12" in both IPS and SWP outside diameters. The recommended continous working pressures are identified by the SWP number (SWP 75, 125, 175), at 73°F. The IPS Schedule and Pumpline pipe recommended working pressures are listed below. The Outside Diameter dimensions for Schedule dimensions and pumpline dimensions conform to the requirements of ASTM Standard D1527 and D2282.

SWP MINEPIPE
.		SWP 75 (PSI)		SWP 125 (PSI)		SWP 175 (PSI)
Size	Average OD	MinWall	WT/FT	MinWall	WT/FT	MinWall	WT/FT
2	2.250	0.070	0.222	0.102	0.356	0.147	0.497
3	3.250	0.089	0.464	0.148	0.743	0.212	1.001
4	4.100	0.122	0.738	0.186	1.182	0.268	1.591
6	6.220	0.170	1.700	0.283	2.723	0.406	3.665
8	8.201	0.240	2.958	0.390	4.737	0.535	6.375
10	10.327	0.300	4.688	0.495	7.507	0.675	10.106
12	12.171	0.354	6.515	0.580	10.432	0.795	14.043

IPS SCHEDULE
.		SCHEDULE 40		SCHEDULE 80		Working PSI @ 73°F
Size	Average OD	Min Wall	WT/FT	Min Wall	WT/FT	SCH-40	SCH-80
1	1.315	.0133	0.235	0.179	0.304	220	320
1.25	1.660	0.140	0.318	0.191	0.420	180	260
1.5	1.900	0.145	0.390	0.200	0.508	170	240
2	2.375	0.154	0.512	0.218	0.704	140	200
3	3.500	0.216	1.062	0.300	1.437	130	190
4	4.500	0.237	1.513	0.337	2.100	110	160
6	6.625	0.280	2.661	0.432	4.007	90	140
8	8.625	0.322	4.125	0.500	6.272	80	120
10	10.750	0.365	5.679	0.593	9.024	70	120
12	12.750	0.406	7.510	0.687	12.418	70	110

PUMPLINE
.		CLASS 150		CLASS 200		Working PSI @ 73°F
Size	Average OD	MinWall	WT/FT	MinWall	WT/FT	CL-150	CL-200
1	1.315	0.080	0.150	0.105	0.185	150	200