Sling-Choker's Rubber Blasting Mats

mat.JPG (10558 bytes)

STANDARD SIZES
IN STOCK
10’ x 10’ 12’ x 12’
10’ x 12’ 12’ x 15’
10’ x 15’ 12’ x 18’
10’ x 18’ 12’ x 20’
10’ x 20’

TRENCHING MATS
1-1/2’ x 8’ 1.1/2’ x 18’
1.1/2’ x 12’ 1-1/2’ x 20’
1.1/2’ x 15’
  • POST HOLE MATS MADE TO ORDER
  • LARGER SIZES MADE TO ORDER

OTHER STYLES OF MATS AND SPECIALIZED BUMPERS DESIGNED TO MEET YOUR REQUIREMENTS
Sling-Choker's Rubber Blasting Mats can be used on uneven surfaces and close to residential areas, where fly rock must be contained. also the Rubber Blasting Mats are reversible, and can be used either side.

REVERSIBLE RUBBER BLASTING MAT
PATENTED DESIGN

THE FINEST TYPE OF BLASTING
MAT AVAILABLE

Rubber Blasting Mats are ruggedly built to form a thick, rubber, protective covering for all types of blasting operations. Construction is of individual rubber segments woven together with wire cable. Recommended particularly for use near structures or populated areas as fly rock is eliminated.

WILL NOT SHORT OUT
BLASTING CAPS

All metal cable is encased in rubber, thus eliminating any possibility of shorting out blasting caps.

EASY TO HANDLE

No pulling or stretching necessary when positioning mat—this saves costly man hours. blasting mats always maintain original shape.

DEADENS NOISE

Noise and shock is reduced greatly by the thick layer of rubber, allowing the use of blasting in built up areas or near structures.

LOW INITIAL COST

The cost is considerably lower in comparison with other types of blasting mats. Because each mat is built of thousands of individual rubber segments, this mat will outlast all others.

FLEXIBILITY

The flexibility of the rubber mat allows contact over uneven and irregular surfaces, and greater ease in handling difficult blasting jobs.