Duff-Norton^®
CABLE REEL JACKS
5 to 10 Ton Models

524-MCR

1022-CRA

1030-CRA

Specifications

* Including base.
§ Includes operating lever.

Ratchet Type
5 Ton

• Ductile iron ratchet reel unit with adjustable hook and reinforced oak base.
• Furnished with double-round socket and 1 X 30-inch steel operating lever.
• Seats up to 2-inch spindles.
• Holds 15 to 60-inch reels.
• A standard for phone cable companies.
• Can be adapted for shop and warehouse use to handle reels of all kinds.
• Manufactured in compliance with ANSI B30.1.
• Each jack operated under rated load at the factory.

10 Ton - Multiple Hooks

• Aluminum single-acting, ratchet reel unit with top and triple-side hooks, and solid oak base.
• Hooks located 12, 22 1/2, 33 and 38 inches from ground.
• Extra-long rack.
• Furnished with double-round socket and 1 1/4 X 60-inch steel operating lever/pry bar.
• Seats up to 2-inch spindles.
• Holds 25 to 90-inch reels.
• Use in pairs on level ground. Can handle countless tandem operations.
• Manufactured in compliance with ANSI B30.1.
• Each jack operated under rated load at the factory.

10 Ton - T-Frame Base

• Aluminum ratchet reel unit furnished in equal quantities, left and right-hand, unless otherwise specified.
• Head swivel joint allows easy spotting without binding spindle.
• Rack bar hand-adjustable to meet load.
• Furnished with double-round socket and 1 1/4 X 60-inch steel operating lever/pitched-end pry bar.
• Top hook seats 3-inch spindles, both lower hooks seat 2 1/2-inch spindles.
• Holds 20 to 84-inch reels.
• A standard for utility companies. Right and left-hand units permit workers to work together.
• Manufactured in compliance with ANSI B30.1.
• Each jack operated under rated load at the factory.