1. Place the locking sleeve between the assembled half link forgings. |
2. Drive the pin through the assembled link ends and sleeve until the end of the pin is flush with the outside of the connecting link halves. |
General Information
HOW TO ASSEMBLE A LOK-A-LOY 8 CONNECTING LINK
Crosby Spectrum 8 Chain Slings are easy to assemble; the only tool required is a hammer.
1. Place the locking sleeve between the assembled half link forgings. |
2. Drive the pin through the assembled link ends and sleeve until the end of the pin is flush with the outside of the connecting link halves. |
HOW TO ASSEMBLE A CROSBY CLEVIS TYPE HOOK
1. Place chain link into clevis slot of hook, Insert pin fully into the clevis ears. |
2. Place the hook on its side and using a hammer, drive the locking pin into the clevis ear until it is flush with the outside surface. |
