Crosby Catalog - Grade 8 Alloy Hoist Hook - SHUR-LOC Eye Hook

** Based on Wire Rope Techical Board's "Wire Rope Sling Users Manual" dated 1990.

Chain Size		S-316A Stock No.	Grade 8 Alloy Chain Working Load Limit* (lbs.) 4:1	Wire Rope XIP IWRC Mechanical Splice		Weight Each (lbs.)
(in.)	(mm)	S-316A Stock No.	Grade 8 Alloy Chain Working Load Limit* (lbs.) 4:1	Size (in.)	Working Load Limit (lbs.) 5:1	Weight Each (lbs.)
-	6	1097918	2500	5/16	2000	.85
1/4-5/16	7-8	1097920	5400	7/16	3800	1.81
3/8	10	1097921	7100	1/2	5000	3.24
1/2	13	1097922	12000	5/8	7800	5.96
5/8	16	1097926	18100	7/8	15200	12.75

Positive Lock Latch is Self-Locking when hook is loaded.
Forged Alloy Steel - Quenched and Tempered.
Eye Style rated for both Wire Rope and Grade 8 Chain.
Meets proposed ASTM and Euronorm standards for Grade 8 chain fittings.
Fatigue rated.
The SHUR-LOC hook, if properly installed and locked, can be used for personnel lifting applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B).
G-414 Heavy Thimble should be used with wire rope slings.
Individually proof Tested at 2 1/2 times the Working Load Limit with certification.
Trigger repair Kit available (S-4316). Consist of spring and roll pin.
Designed with "Engineered Flat" to connect to Grade 8 chain fittings.