 S-319 |  |  |
Crosby Hoist Hooks
SHANK HOOKS
S-319 | | |
| Dimensions (in.) | ||||||||||||||
| D | F | G | H | J | K | L | O | P | R | T | X §§ | Y | Z | Deformation Indicator AA |
| 2.88 | 1.25 | .75 | .81 | .97 | .56 | 5.03 | .88 § | 2.00 | 2.28 | .81 § | .59 | 2.00 | .69 | 1.50 |
| 3.19 | 1.38 | .84 | .94 | 1.06 | .62 | 5.62 | .97 | 2.25 | 2.53 | .81 | .66 | 2.25 | .78 | 1.50 |
| 3.62 | 1.50 | 1.00 | 1.16 | 1.12 | .75 | 6.19 | 1.00 § | 2.53 | 2.69 | .84 § | .72 | 2.50 | .88 | 2.00 |
| 4.09 | 1.63 | 1.12 | 1.31 | 1.25 | .84 | 6.94 | 1.12 | 2.84 | 3.06 | 1.19 | .88 | 2.75 | 1.00 | 2.00 |
| 4.94 | 2.00 | 1.44 | 1.62 | 1.50 | 1.12 | 8.47 | 1.06 | 3.56 | 3.78 | 1.38 | 1.16 | 3.25 | 1.25 | 2.50 |
| 6.50 | 2.50 | 1.81 | 2.06 | 1.88 | 1.38 | 10.31 | 1.50 | 4.44 | 4.75 | 1.78 | 1.41 | 3.75 | 1.56 | 3.00 |
| 7.56 | 3.00 | 2.25 | 2.62 | 2.25 | 1.62 | 12.38 | 1.75 | 5.50 | 5.88 | 2.12 | 1.81 | 4.25 | 1.94 | 4.00 |
| 8.69 | 3.25 | 2.59 | 2.94 | 2.50 | 1.94 | 13.53 | 1.91 | 6.19 | 6.41 | 2.56 | 2.00 | 4.50 | 2.19 | 4.00 |
| 11.00 | 4.25 | 2.97 | 3.50 | 3.38 | 2.38 | 16.44 | 2.75 | 7.31 | 7.94 | 2.88 | 2.56 | 5.50 | 2.62 | 5.00 |
| 13.62 | 5.00 | 3.62 | 4.62 | 4.00 | 3.00 | 23.09 | 3.25 | 8.78 | 9.44 | 3.44 | 3.12 | 10.00 | 3.12 | 6.50 |
| 13.62 | 5.00 | 3.62 | 4.62 | 4.00 | 3.00 | 31.09 | 3.25 | 8.78 | 9.44 | 3.44 | 3.12 | 18.00 | 3.12 | 6.50 |
| 14.06 | 5.38 | 4.56 | 5.00 | 4.25 | 3.62 | 32.12 | 3.00 | 11.38 | 12.56 | 3.88 | 4.00 | 15.00 | 4.00 | 7.00 |
| 14.06 | 5.38 | 4.56 | 5.00 | 4.25 | 3.62 | 41.12 | 3.00 | 11.38 | 12.56 | 3.88 | 4.00 | 24.00 | 4.00 | 7.00 |
| 15.44 | 6.00 | 5.06 | 5.50 | 4.75 | 3.72 | 34.12 | 3.38 | 12.63 | 14.00 | 4.75 | 4.00 | 15.00 | 4.00 | 8.00 |
| 15.44 | 6.00 | 5.06 | 5.50 | 4.75 | 3.72 | 43.12 | 3.38 | 12.63 | 14.00 | 4.75 | 4.00 | 24.00 | 4.00 | 8.00 |
| 18.50 | 7.00 | 6.00 | 6.50 | 5.75 | 4.44 | 36.06 | 4.12 | 14.81 | 15.50 | 5.69 | 4.50 | 14.50 | 4.50 | 10.00 |
| 18.50 | 7.00 | 6.00 | 6.50 | 5.75 | 4.44 | 47.56 | 4.12 | 14.81 | 15.50 | 5.69 | 4.50 | 26.00 | 4.50 | 10.00 |
| 20.62 | 7.75 | 6.69 | 7.25 | 6.50 | 4.81 | 41.16 | 5.38 | 16.53 | 19.38 | 6.00 | 5.00 | 15.00 | 5.00 | 11.50 |
| 20.62 | 7.75 | 6.69 | 7.25 | 6.50 | 4.81 | 49.16 | 5.38 | 16.53 | 19.38 | 6.00 | 5.00 | 23.00 | 5.00 | 11.50 |
| 23.00 | 6.81 | 8.59 | 9.88 | 5.88 | 5.50 | 42.12 | 4.50 | 17.38 | 18.41 | 7.00 | 7.00 | 15.00 | 7.00 | 12.00 |
| 23.00 | 6.81 | 8.59 | 9.88 | 5.88 | 5.50 | 48.12 | 4.50 | 17.38 | 18.41 | 7.00 | 7.00 | 21.00 | 7.00 | 12.00 |
| 24.38 | 6.75 | 9.12 | 10.94 | 6.00 | 6.00 | 45.75 | 4.50 | 18.00 | 18.38 | 7.00 | 7.25 | 18.00 | 7.25 | 13.00 |
| 26.69 | 7.50 | 9.75 | 11.81 | 6.60 | 7.00 | 50.50 | 5.0 | 19.25 | 20.50 | 8.00 | 8.00 | 20.00 | 8.00 | 13.00 |
| 30.12 | 9.50 | 10.62 | 12.94 | 8.00 | 7.25 | 54.69 | 6.25 | 22.69 | 20.50 | 8.25 | 9.50 | 20.00 | 9.50 | 13.00 |
** Available hot dip galvanized.
§ Dimensions shown are for 4055 Latch kits. Dimensions for sizes 3 ton carbon and larger are for PL Latch kits.
§§ Dimension before machining (as forged). See page 71 - for maximum clean up dimensions after machining.
* Note: Proof load is 2 times Working Load Limit. All carbon hooks - average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 1 ton through 22 ton - average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 30 through 60 tons - average straightening load (ultimate load) is 4.5 times Working Load Limit. All Alloy shank hooks - average straightening load (ultimate load) is 4.5 times the Working Load Limit. All Bronze hooks - average straightening load (ultimate load) is 4 times Working Load Limit.
QUIC-CHECK™ |  |
