Crosby Synthetic Sling Fittings

"Synthetic Sling Saver" Shackles and Hooks

S-252 (Bolt Type)

S-253 (Screw Pin)

WS-320A

• Designed with Non-Slip surface that:
  • Eliminates "bunching" effect caused by traditional shackles.
  • Reduces sling tendency to slide.
• Shackles available in sizes 1 1/2 to 5 tons.
• Hooks available in sizes 1 1/2, 3 and 5 tons.
• Increased radius of bow / eye gives wider sling bearing surface resulting in an increased area for load distribution, thus:
  • Increasing Synthetic Sling efficiency by at least 15% as compared to standard anchor and chain shackle bows and conventional eye hooks. This allow 100% of the slings rated Working Load Limit to be acheived.
  • Allowing better load distribution on internal fibers.
• Design factor of 5 to 1
• Shackles available in both a screw Pin and Bolt, Nut and cotter pin configuration.
  • Bolt (Pin) has a larger diameter that provides better load distribution.
• Each shackle and hook has a Product Identification Code (PIC) for material traceability along with a Working Load Limit and the name Crosby forged into it.
• All Alloy construction.
• Fatigue rated to 20,000 cycles at 1 1/2 times the Working Load Limit.

Providing a variety of connections to meet your lifting needs.