National Swage Fittings

"COLD TUFF®" DUPLEX NON-TAPERED SLEEVE

S-506

S-506 Steel Duplex Non-Tapered Sleeve SpecificationsPress / Die Data
Stock No.Rope
Size
(in.)		Weight
Per
100 Pcs.
(lbs.)		Pkg. Qty.Before Swage DimensionsMax. After
Swage
Dimensions
(in.)		Die Desc.Stock No.
500 Ton
1000 Ton
1500 Ton
5 x 7
ABCD
10393345/16172001.251.06.81.19.773/8 1st Stage1192364
10393523/8131001.251.12.81.14.773/8 1st Stage1192364
10393707/1631501.631.411.02.191.031/2 1st Stage1192408
10393981/227501.631.441.02.161.031/2 1st Stage1192408
10394149/1663252.251.721.23.231.295/8 1st Stage1192444
10394325/854252.251.841.28.201.295/8 1st Stage1192444
10394503/491102.632.161.52.231.543/4 1st Stage1192462
10394787/8126102.882.501.75.271.807/8 1st Stage1192480
10394961187103.062.842.00.332.051 1st Stage1192505
10395391 1/4384Bulk4.063.502.50.382.561 3/8 Stage1193025

  • For turnback wire rope splicing.

  • Designed for lowered temperature toughness.

  • Resists cracking when swaged (equals or exceeds stainless steel sleeves).

  • Special processed low carbon steel.

  • "COLD TUFF®" for better swageability.

  • Stamp for identification after swaging without concern for fractures (as per directions in National Swaging Brochure).

  • Turnback terminations have efficiency ratings of 94% based on the catalog strength of wire rope.

NOTE: S-506 Duplex sleeves are recommended for use with 6 x 19 or 6 x 37, IPS or XIP(EIP), RRL, FC or IWRC wire rope.