COFFING® ELECTRIC CHAIN HOISTS
PLAIN TROLLEY MODELS
Rated loads from 1 to 5 tons
SPECIFICATIONS
Rated
Load
(Lbs.) |
Lifting
Speed
(Ft./Min.) |
Motor
H.P. |
Beam
Height
(in.) |
Weight*
(Lbs.) |
Reeving |
Model
Number |
| 2000 |
32 |
2 |
6-18 |
347 |
SINGLE |
ECT-2032 |
| 4000 |
16 |
2 |
6-18 |
347 |
SINGLE |
ECT-4016 |
| 4000 |
24 |
3 |
6-18 |
354 |
SINGLE |
ECT-4024 |
| 6000 |
10 |
2 |
6-18 |
396 |
DOUBLE |
ECT-6010 |
| 6000 |
16 |
3 |
6-18 |
403 |
DOUBLE |
ECT-6016 |
| 8000 |
8 |
2 |
6-18 |
520 |
DOUBLE |
ECT-8008 |
| 8000 |
12 |
3 |
6-18 |
527 |
DOUBLE |
ECT-8012 |
| 10000 |
5 |
2 |
6-18 |
561 |
TRIPLE |
ECT-10005 |
| 10000 |
8 |
3 |
6-18 |
568 |
TRIPLE |
ECT-10008 |
*Weight represents 10 ft. lift.
Notes: For lifts of 16 ft.-40 ft. triple chain and 26 ft.-60 ft. double
chain and 51 ft.-120 ft. single chain models, geared limit switch is required.
- Rated loads from 1 to 3 tons.
- 230/460-volt, three-phase motors standard. 575- and 208-volt, three-phase motors
are optional. Consult factory.
- Two-speed, three-phase models available in single voltage motors only. 3 to 1
speed ratio.
- 10-foot standard lift. Optional lifts available.
- Adjustable upper and lower limit switches prevent hoist damage due to overtravel.
- Overload limiting clutch guards against lifting of damaging overloads while
operating the hoist.
- Mechanical load brake operates even when power is off to control load drift.
- Five-pocket load sheave provides more even chain support with less wear on the
chain, smoother lifting, and less vibration to the load and supporting structure.
- Oil-filled transmission runs cooler, lasts longer than competitive grease-filled
models.
- A specially designed pushbutton station is formed to fit the operator's hand,
allowing for thumb or two-handed operation. NEMA-3R standard.
- Crossmounting is standard.
- Adjustable for 6" to 18" American Standard I-Beams with recommended
4-foot minimum radius for 1, 2, 3 tons.
- Standard 4 and 5 ton models, trolley adjustable for 8" to 18" American
Standard I-Beams for straight track. Articulating models for 4-foot minimum radius cruved
track available.
- 4 and 5 ton models use 8-wheel design to reduce beam flange stresses.
- Available to fit wide-flange and patented track beams.
- Fully machined, cast iron wheels equipped with sealed, lifetime lubricated
precision ball bearings for long life.
- Trolley sideplates feature heavy-duty bumpers to act as safety lugs and to
protect wheels.
- Built to rugged specifications for long efficient service.
- For accessories see pages i20a.htm, i20b.htm,
i20c.htm, i21a.htm, i21b.htm,
i22a.htm, i22b.htm, i22c.htm,
and i23.htm