CM - Big Orange Load Binders

CM Big Orange^® Load Binders

Chain size (in.)	Product code	Chain grade	Handle length (in.)	Take up (in.)	Working load limit (lbs.)*	Min. ultimate breaking strength (lbs.)	Approx. weight (lbs.)
1/4	M103**	G30	11 1/4	3	1,500	5,300	2
1/4	M104	G30, 40	11 1/4	3	2,600	7,800	2 1/2
1/4	M105	G30, 40, 70	16	4 7/8	5,400	19,000	8 1/4
5/16	M105	G30, 40, 70	16	4 7/8	5,400	19,000	8 1/4
3/8	M105	G30, 40	16	4 7/8	5,400	19,000	8 1/4
5/16	M106	G30, 40, 70	18 1/2	5 1/8	9,200	28,000	11 1/4
3/8	M106	G30, 40, 70	18 1/2	5 1/8	9,200	28,000	11 1/4
7/16	M106	G30, 40	18 1/2	5 1/8	9,200	28,000	11 1/4
1/2	M106	G30, 40	18 1/2	5 1/8	9,200	28,000	11 1/4

** One swivel without connecting link on M103.

WARNING

LOAD BINDERS SYSTEMS STORE ENERGY WHICH CAN RELEASE SUDDENLY.

To avoid injury, operate only by hand from a firm standing position. Operate handle cautiously. Stay clear of handle path; handle may release suddenly. Follow instructions.

Provides more control in binding and releasing without extra tools.
Handle closes down away from load with more leverage.
Functionally superior to any other on the road.
Handles are drop forged from special bar quality steel.
Hooks are heat treated steel.
Single welded links as in binder chain for better reliability.
More take-up for binding greater loads. Smaller handle slot with riveted nose to prevent spreading at the critical loading point.

Claw hook load binder

Chain size (in.)	Product code	Chain grade	Handle length (in.)	Take up (in.)	Working load limit (lbs.)*	Min. ultimate breaking strength (lbs.)	Approx. weight (lbs.)
1/4	M105C	G30, 40, 70	16	4 7/8	5,400	19,000	8 1/2
5/16	M105C	G30, 40, 70	16	4 7/8	5,400	19,000	8 1/2
3/8	M105C	G30, 40	16	4 7/8	5,400	19,000	8 1/2

WARNING

LOAD BINDERS SYSTEMS STORE ENERGY WHICH CAN RELEASE SUDDENLY.

To avoid injury, operate only by hand from a firm standing position. Operate handle cautiously. Stay clear of handle path; handle may release suddenly. Follow instructions.

Same reliable design and construction as lever type load binder.
Equipped with claw hooks for easy one-handed connection to loose or taut chain.
Meets D.O.T. and C.V.S.A. requirements.

Load binder operating instructions

Following D.O.T. Federal Motor Carrier Safety Regulations S 392.9, S 393.100, and S 393.102.
Inspect before use. Replace worn and deformed binders. Lubricate pivot and swivel points for optimum performance.
Do not operate with anyone on load.
Always apply lever binder in a straight line hook to hook manner without bending and such that handle goes down when securing load.
Tighten binders before moving and recheck frequently.
Do not exceed working load limit shown on binder - hand effort will tighten binder to working load limit.
Do not use cheater bar or handle extension as their use can overload binder system and result in injury.
Secure handle down with a positive retaining method.
Release handle/load with extreme care. Make sure everyone is clear. Lever binder handle can snap back over center. Use open palm under handle and push up.