CM - Big Orange Attachments

CM Big Orange^® Attachments
Hooks

Rigging eye hook and latch - alloy

Design straightening load is 5 times working load limit.
Hook and latch assemblies furnished separately.
All eye type hooks are furnished pre-drilled for latches.
Painted orange.

Alloy steel hook
Hot forged and heat treated and tempered

Product code hook	Product code latch kit**	Working load limit (metric tons)*	Dimensions (inches)												Approx. weight per 100 (lbs.)
Product code hook	Product code latch kit**	Working load limit (metric tons)*	A	B	C	D	E	G	H	K	L	R	T	O	Approx. weight per 100 (lbs.)
M404A	4x404	1	1.500	.750	.375	3.000	1.000	.750	.875	.562	4.375	3.125	.812	.875	63
M405A	4x405	1 1/2	1.750	.875	.438	3.188	1.078	.844	.938	.625	4.938	3.656	.938	.938	85
M406A	4x406	2	2.125	1.125	.500	3.625	1.125	1.000	1.156	.750	5.594	4.094	1.000	1.000	138
M407A	4x406	3	2.500	1.250	.625	4.094	1.250	1.125	1.312	.844	6.438	4.688	1.188	1.125	192
M410A	4x410	4 1/2	3.063	1.563	.750	5.063	1.531	1.438	1.625	1.125	7.969	5.781	1.438	1.375	370
M412A	4x412	7 1/2	3.875	2.000	.938	6.500	1.969	1.875	2.063	1.375	10.125	7.313	1.875	1.688	728
M414A	4x414	11	4.685	2.441	1.122	7.598	2.244	2.480	2.606	1.850	12.500	9.055	2.380	2.047	687
M416A	4x416	15	5.354	2.835	1.268	8.700	2.480	2.756	2.917	2.165	13.984	10.039	2.380	2.244	993
M418A	4x418	22	6.614	3.504	1.555	11.102	3.346	3.228	3.516	2.598	17.126	12.480	2.500	2.992	1683

**Stainless steel latch kit available. Latch is designed to retain such items as slings and chains under slack conditions. The latch is not intended to support the load.
Ton = 2,000

WARNING

Improper use or care of hooks can result in bodily injury or property damage.

To avoid injury or damage, always observe the following when using hooks:

Use only alloy attachments for overhead lifting.
Do not exceed working load limit.
Do not tip load or use in any manner for which the hook was not intended.
Do not shock or dynamic load.
Do not apply load to hook latches. Latches are to retain slack slings and chain only.

Claw hook

Product code	Dimensions (inches)							Factory pack**	Approx. weight per 100 (lbs.)
Product code	A	B	C	D	E	F	G	Factory pack**	Approx. weight per 100 (lbs.)
M206C	2 5/32	4 3/16	1/2	11/16	1 5/8	-	-	10	115
M806C	2 5/32	4 1/8	15/32	-	-	7/16	1/2	10	120

**Bulk pack on request.

WARNING

Improper use or care of hooks can result in bodily injury or property damage.

To avoid injury or damage, always observe the following when using hooks:

Use only alloy attachments for overhead lifting.
Do not exceed working load limit.
Do not tip load or use in any manner for which the hook was not intended.
Do not shock or dynamic load.
Do not apply load to hook latches. Latches are to retain slack slings and chain only.

Especially designed for easy hook-up to loose or taut chain with one hand connection.
Drop forged from special bar quality steel.
Heat treated for greater strength and increased wear characteristics.
Allows full joint strength when used with high test grade 40 or transport grade 70 chain.
Clear protective finish resists rust and provides cleaner handling.
For use with 3/8" G40 or G70 chain.
Working load limit 6,600 lbs.