CM - Big Orange Attachments

Chain size (in.)	Product code	Working load limit (lbs.)*	Dimensions - (inches)					Approx. wt. per 100 (lbs.)	Standard industrial pack
Chain size (in.)	Product code	Working load limit (lbs.)*	W	D	H	L	R	Approx. wt. per 100 (lbs.)	Standard industrial pack
1/4	M304	2,600	17/32	2 9/16	15/16	3 19/32	2 15/32	42	20
5/16	M305	3,900	5/8	3 1/6	1 1/16	4 3/32	2 25/32	58	20
3/8	M306	5,400	25/32	3 1/2	1 1/4	4 27/32	3 5/16	100	20
7/16	M307	7,200	13/16	4 21/64	1 9/16	5 19/32	3 3/4	150	10
1/2	M308	9,200	15/16	4 29/32	1 3/4	6 11/32	4 5/16	250	10
5/8	M310	11,500	1 3/16	5 5/8	2	7 3/4	5 5/16	370	5
3/4	450075	-	1 1/4	7 1/8	2 1/4	9	5 13/16	600	Bulk pack

NOTE: For G40 clear finish hook, add suffix "H" to product code (i.e., M204H).
For G40 zinc finish hook, add suffix "HZ" to product code (i.e., M204HZ).

WARNING

Improper use or care of hooks can result in bodily injury or property damage.

To avoid injury or damage, always observe the following when using hooks:

Use only alloy attachments for overhead lifting.
Do not exceed working load limit.
Do not tip load or use in any manner for which the hook was not intended.
Do not shock or dynamic load.
Do not apply load to hook latches. Latches are to retain slack slings and chain only.

Chain size (in.)	Product code	Working load limit (lbs.)*	Dimensions (inches)					Approx. wt. per 100 (lbs.)	Standard industrial pack
Chain size (in.)	Product code	Working load limit (lbs.)*	W	D	H	L	R	Approx. wt. per 100 (lbs.)	Standard industrial pack
9/32	M204A	3,500	17/32	2	3/8	3 7/32	2 1/32	44	30
5/16	M205A	4,500	5/8	2 13/32	7/16	3 25/32	2 13/32	69	30
3/8	M206A	7,100	25/32	2 11/16	1/2	4 11/32	2 3/4	100	30
7/16**	M207A	6,900	13/16	3 3/64	37/64	4 55/64	3 11/64	120	20
1/2	M208A	12,000	15/16	3 1/4	21/32	5 9/16	3 9/16	231	10
5/8	M210A	18,100	1 1/16	4 11/32	25/32	7 1/16	4 9/16	400	10

WARNING

Improper use or care of hooks can result in bodily injury or property damage.

To avoid injury or damage, always observe the following when using hooks:

Use only alloy attachments for overhead lifting.
Do not exceed working load limit.
Do not tip load or use in any manner for which the hook was not intended.
Do not shock or dynamic load.
Do not apply load to hook latches. Latches are to retain slack slings and chain only.