CM - Big Orange Attachments

Product code	Size dia. D	Working load limit (tons)*	Dimensions (inches)								Weight each (lbs.)
			P	W	L	O	R	K	Tolerance plus or minus
			P	W	L	O	R	K	L	W
M450	1/2	3	5/8	13/16	13/16	3 1/8	1 1/4	2 1/16	1/16	1/16	.6
M451	5/8	4 1/2	3/4	1 1/16	1 1/16	3 13/16	1 1/2	2 5/8	1/8	1/16	1.3
M452	3/4	6 1/2	7/8	1 1/4	1 1/4	4 7/16	1 7/8	3 1/8	1/4	1/16	2.2
M453	7/8	8 1/2	1	1 7/16	1 7/16	5 5/16	2 1/8	3 5/8	1/4	1/16	3
M454	1	10	1 1/8	1 11/16	1 11/16	6	2 3/8	4 3/16	1/4	1/16	4.5

WARNING

Improper use or care of shackles can result in bodily injury or property damage.

To avoid injury or damage, always observe the following when using alloy shackles:

Use only alloy chain and attachments for overhead lifting.
Do not exceed working load limit.
Do not shock or impact load.
Do not side load - center line of load must coincide with center line of shackle.
Do not replace pin with other than original equipment parts.
Inspect before use for wear, deformation and pin engagement.

When ordering, specify carbon, alloy or stainless steel (slate grade), whether screw pin, nut and bolt or loose pin is required, plus body and pin diameters. Also, state whether you require complete shackles, body only or pin only.
All items self colored unless otherwise specified.