Jeamar Winches Product Catalog - CFF Series Controlled Free-Fall Winches

Model Number			CFF 660	CFF 1100	CFF 2200	CFF 3300
Working Load Limit		lb	660	1100	2200	3300
Working Load Limit		kg	300	500	1000	1500
Rope Diameter		in	3/16	1/4	3/8	7/16
Rope Diameter		mm	5	6	9	11
Rope Storage Capacity		ft	85	67	50	45
Rope Storage Capacity		m	26	20	15	14
Lift Per Crank Rotation		in	3.0	2.72	1.42	1.18
Lift Per Crank Rotation		mm	76	69	36	30
Hand Force Required At Maximum Loads		lb	22.7	33.9	36.1	44.7
Hand Force Required At Maximum Loads		kg	10.3	15.4	16.4	20.3
Maximum Lowering Speed		ft/min	118	118	59	59
Maximum Lowering Speed		m/min	36	36	18	18
DIMENSIONS	A	in	10.43	13.19	13.58	14.76
	A	mm	265	335	345	375
	B	in	8.74	10.63	18.78	20.98
	B	mm	222	270	477	533
	C	in	0.59	0.75	0.79	0.79
	C	mm	15	19	20	20
	D	in	0.95	0.98	1.18	1.18
	D	mm	24	25	30	30
	E	in	12.17	15.63	15.75	17.56
	E	mm	309	397	400	446
	F	in	13.70	17.13	24.8	27.36
	F	mm	348	435	630	695
	G	in	17.32	17.32	17.32	17.32
	G	mm	440	440	440	440
	H	in	21.97	22.95	23.74	24.72
	H	mm	558	583	603	628
	K	in	9.37	9.37	9.37	9.37
	K	mm	238	238	238	238
	N	in	2.48	2.95	3.74	4.13
	N	mm	63	75	95	105
	O	in	4.72	5.90	7.87	8.07
	O	mm	120	150	200	205
	P	in	3.11	3.39	4.61	4.92
	P	mm	79	86	117	125
	R	in	7.68	10.24	10.83	11.42
	R	mm	195	260	275	290
Weight		lb	75	110	191	242
Weight		kg	34	50	87	110

Controlled Free Fall
By simply pushing the handle back in the reverse direction, the winch will pay out at a controled speed. The pay out speed is variable up to a predetermined maximum and is under the full control of the operator at all times. When the handle is released, the brake automatically goes on and the load is held.

Double Braking System
A centrifugal dynamic brake is incorporated to govern maximum speed and to prevent overspeeding of the load. In addition, a load-activated brake is incorporated, allowing the operator to stop and hold the load securely in any position. This unique braking system also prevents the winch handle from recoiling.

High Rope to Drum Ratio
Rope life is substantially increased with drum diameters a minimum of 20 times the diameter of the rope. With wire rope under reduced bending stress, premature rope breakage is minimized.

Fully Enclosed Gears
All gears are fully enclosed, increasing operational protection and making the winch ideal for use in adverse conditions.

Automatic Brake
The brake mechanism uses a split-shoe brake acting against a cylindrical drum. Counterclockwise rotation of the handle releases the brake by removing the axial pressure at the conical faces. The load begins to fall and the pivoted masses swing out under centripetal acceleration and reapply the brake. Releasing the handle applies the brake for positive holding of the load.

Jeamar hand winches are designed and manufactured to DIN 15020. They are for manual use only and must not be power driven or used to move, lift or lower persons. Due to continuing development, all specifications are subject to change without notice.