Crosby G209 SP Anchor Shackles


Shackle Screw Pin Anchor

Crosby Screw Pin Anchor Shackles - Galvanized

CRG209

These forged,quenched, and tempered shackles have alloy pins & are hot dip galvanized. Crosby shackles have the working load limit (WLL) permanently shown on every shackle.

Can meet DNV impact requirements of 42 joules at -20 C. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load, and temperature requirements. Crosby products meet other critical performance requirements including fatigue life, impact properties, and material traceability, not addressed by ASME B30.26.

 

CR209 Shackles

 

* Select the desired product below to compile your quote
Size
WLL
A
B
C
D
E
F
G
H
L
M
P
Weight
Product
3/16"
1/3 T
0.4"
0.3"
0.9"
0.2"
0.6"
0.6"
1"
1.5"
0.2"
1.1"
0.2"
0.06 lb
CRG209-003
1/4"
1/2 T
0.5"
0.3"
1.1"
0.3"
0.8"
0.6"
1.3"
1.8"
0.2"
1.4"
0.3"
0.1 lb
CRG209-004
5/16"
3/4 T
0.5"
0.4"
1.2"
0.3"
0.8"
0.8"
1.5"
2.1"
0.2"
1.7"
0.3"
0.19 lb
CRG209-005
3/8"
1 T
0.7"
0.4"
1.4"
0.4"
1"
0.9"
1.8"
2.5"
0.3"
2"
0.4"
0.31 lb
CRG209-006
7/16"
1.5 T
0.8"
0.5"
1.7"
0.4"
1.2"
1.1"
2"
2.9"
0.3"
2.4"
0.4"
0.38 lb
CRG209-007
1/2"
2 T
0.8"
0.6"
1.9"
0.5"
1.3"
1.2"
2.3"
3.3"
0.4"
2.7"
0.5"
0.72 lb
CRG209-008

 


Contact your regional Sling-Choker sales representative to request a quote or any additonal information

 

Crosby Rigging Accessories